wireless system Rode Model: Mikrofon Wireless GO II Single black

Rode digital wireless microphone system Wireless GO II Single

An ultra-compact complete system for all content creators who are on the move. The Wireless GO II Single consists of a transmitter and receiver module. A microphone optimally tuned for voice transmission is integrated in the transmitter. The receiver module has an analog 3.5 mm TRS output for cameras and a digital USB-C output for Mac and PC, smartphone and iPhone.

Use is simple: switch on the two modules and they connect automatically. The signal quality is crystal clear, both analog and digital, and can be transmitted immediately. The transmitter and receiver have an internal rechargeable battery that lasts for at least four hours. The Wireless GO II has a range of 200 meters in clear visibility. The scope of delivery includes a short 3.5 mm TRS cable, 2 fur windscreens, two USB-C to USB-A cables and a neoprene carrying case.

The small 4x4 cm transmitter module has a clip on the back that allows it to be conveniently attached to clothing - preferably to the collar or lapel. If the module is too conspicuous in the picture, you can use the 3.5 mm TRS socket on the side and connect an external microphone, for example the Lavalier GO. If you want, you can also record the audio signal directly in the transmitter module itself as a backup. For this onboard recording function, the module has a memory chip that is sufficient for over 40 hours of sound. For undisturbed outdoor recordings, you should always use the supplied fur windscreen. It can be conveniently attached to the transmitter module with its bayonet catch.

The receiver module can be easily attached to the camera's hot shoe. The module is then connected to the camera's microphone input using the TRS cable supplied. The signal can also be output digitally to a computer or an Android or iOS device via a suitable USB cable. The two buttons on the front can be used to select the output mode, mute the transmitter module and reduce the output level. The LC display shows the output mode, level and charge status of the receiver and transmitter. If required, the safety mode can also be activated in the receiver module, whereby the signal is output both at full level (TRS peak) and reduced by 20 dB (TRS ring). If an unexpectedly loud sound source on the main track distorts audibly, you can simply revert to the quieter, undistorted safety track in post-processing.

Thanks to the free Rode Central software, firmware updates, function extensions and special settings can be made on the Wireless GO II SINGLE. RØDE Connect is an amazing and very easy to use podcast/streaming software and is also free.

• ultra-compact, easy to use
• fee and registration-free 2.4 GHz band
• analog 3.5 mm TRS output for cameras, switchable level adjustment
• digital USB-C output for Mac/PC, smartphone, iPhone
• Tx clip-on transmitter with integrated microphone (omnidirectional capsule)
• 3.5 mm TRS socket for external microphone
• 40 hours of onboard recording possible in the transmitter module
• Range: 200 m (free line of sight)
• 2-channel receiver RX for clamp-on or flash shoe mounting
• Safety channel mode (-20 dB) can be activated
• Power supply: internal LiPo battery (TX and RX)
• Battery capacity: up to 7 hours, charging via USB-C socket
• Incl. 3.5 mm TRS connection cable SC5 and 2x USB-C to USB-A cable
• incl. 2x fur windscreen and neoprene carrying case
• Dimensions: 46 x 44x 19 mm (per module)
• Weight: 32 g (per module)
• Compatible with Rode Connect and Rode Central (free software/app)
• *an optional cable is required for Android and iOS devices